Rolex DAY-DATE Oyster, 40 mm, yellow gold M228238-0061
REFERENCE
228238
MODEL CASE
Oyster, 40 mm, yellow gold
OYSTER ARCHITECTURE
Monobloc middle case, screw-down case back and winding crown
DIAMETER
40 mm
MATERIAL
18 ct yellow gold
BEZEL
Fluted
WINDING CROWN
Screw-down, Twinlock double waterproofness system
CRYSTAL
Scratch-resistant sapphire, Cyclops lens over the date
WATER-RESISTANCE
Waterproof to 100 metres / 330 feet
MOVEMENT
Perpetual, mechanical, self-winding
CALIBRE
3255, Manufacture Rolex
PRECISION
-2/+2 sec/day, after casing
OSCILLATOR
Paramagnetic blue Parachrom hairspring. High-performance Paraflex shock absorbers
ESCAPEMENT
Chronergy with optimized energy efficiency
WINDING
Bidirectional self-winding via Perpetual rotor
POWER RESERVE
Approximately 70 hours
BRACELET
President, semi-circular three-piece links
BRACELET MATERIAL
18 ct yellow gold
CLASP
Concealed folding Crownclasp
DIAL
Green
CERTIFICATION
Superlative Chronometer (COSC + Rolex certification after casing)
Green Dial
Lacquer combines almost limitless freedom of colour with intensity and a smooth finish. The lacquering technique consists of successively depositing six thin layers of lacquer on a brass base plate. A colourless varnish is then applied to give the colour or shade all of its depth and shine. Once the varnish is dry, the surface of the dial is polished to magnify the colour; the dial is then ready to be pad printed and receive its appliques.
The Fluted Bezel
The Rolex fluted bezel is a mark of distinction. Originally, the fluting of the Oyster bezel had a functional purpose: it served to screw the bezel onto the case helping to ensure the waterproofness of the watch. It was therefore identical to the fluting on the case back, which was also screwed onto the case for waterproofness, using specific Rolex tools. Over time, the fluting became an aesthetic element, a genuine Rolex signature feature. Today the fluted bezel is a mark of distinction, in gold on this Day-Date 40.
18 ct yellow gold
By operating its own exclusive foundry, Rolex has the unrivalled ability to cast the highest quality 18 ct gold alloys. According to the proportion of silver, copper, platinum or palladium added, different types of 18 ct gold are obtained: yellow, pink or white. They are made with only the purest metals and meticulously inspected in an in-house laboratory with state-of-the-art equipment, before the gold is formed and shaped with the same painstaking attention to quality. Rolex's commitment to excellence begins at the source.
REFERENCE
228238
MODEL CASE
Oyster, 40 mm, yellow gold
OYSTER ARCHITECTURE
Monobloc middle case, screw-down case back and winding crown
DIAMETER
40 mm
MATERIAL
18 ct yellow gold
BEZEL
Fluted
WINDING CROWN
Screw-down, Twinlock double waterproofness system
CRYSTAL
Scratch-resistant sapphire, Cyclops lens over the date
WATER-RESISTANCE
Waterproof to 100 metres / 330 feet
MOVEMENT
Perpetual, mechanical, self-winding
CALIBRE
3255, Manufacture Rolex
PRECISION
-2/+2 sec/day, after casing
OSCILLATOR
Paramagnetic blue Parachrom hairspring. High-performance Paraflex shock absorbers
ESCAPEMENT
Chronergy with optimized energy efficiency
WINDING
Bidirectional self-winding via Perpetual rotor
POWER RESERVE
Approximately 70 hours
BRACELET
President, semi-circular three-piece links
BRACELET MATERIAL
18 ct yellow gold
CLASP
Concealed folding Crownclasp
DIAL
Green
CERTIFICATION
Superlative Chronometer (COSC + Rolex certification after casing)
Green Dial
Lacquer combines almost limitless freedom of colour with intensity and a smooth finish. The lacquering technique consists of successively depositing six thin layers of lacquer on a brass base plate. A colourless varnish is then applied to give the colour or shade all of its depth and shine. Once the varnish is dry, the surface of the dial is polished to magnify the colour; the dial is then ready to be pad printed and receive its appliques.
The Fluted Bezel
The Rolex fluted bezel is a mark of distinction. Originally, the fluting of the Oyster bezel had a functional purpose: it served to screw the bezel onto the case helping to ensure the waterproofness of the watch. It was therefore identical to the fluting on the case back, which was also screwed onto the case for waterproofness, using specific Rolex tools. Over time, the fluting became an aesthetic element, a genuine Rolex signature feature. Today the fluted bezel is a mark of distinction, in gold on this Day-Date 40.
18 ct yellow gold
By operating its own exclusive foundry, Rolex has the unrivalled ability to cast the highest quality 18 ct gold alloys. According to the proportion of silver, copper, platinum or palladium added, different types of 18 ct gold are obtained: yellow, pink or white. They are made with only the purest metals and meticulously inspected in an in-house laboratory with state-of-the-art equipment, before the gold is formed and shaped with the same painstaking attention to quality. Rolex's commitment to excellence begins at the source.
